Sharp UX-144 Operation Manual page 28

The UX-114 can be used like a regular telephone to make and receive voice
calls.
When the po~~eris ofi >.OU cannot dial to make telephone calls. Ho~~'evlei-, >'OU c an ~-eceitle
incoming calls.
Making te/ephone calls
1
SPEAKER
':<%,
,~:k
Qh
o
Pick up the handset or press
the
or
SPEAKER key. Listen for the dial tone.
.@o@o== \>"+
,, 0,
\
/, //
"\. /
~,, .No,,~'
\
'J
2
SPACE
o
1
GHI
o
4
Pus
o–
7
0
*
Dial the number using
one of the follo-
wing methods:
Normal Dialing:
Enter the full tele-
phone number with the numeric keys.
Rapid Key Dialing: Press the appro-
priate Rapid Key.
Speed Dialing: Press the SPEED
DIAL key, and enter the 2-digit Speed
Dial number with the numeric keys.
3
Redial
Speak with the other party when they
answer.
If you pressed the SPEAKER key, pick
up the handset.
The last number called can be redialed by pressing the REDIAL key (it is not
necessary to pick
up the handset or press the SPEAKER key). When the
other party answers, pick up the handset.
Hold
You can put the other party on hold during a conversation by pressing the
HOLD key. When this is done, they cannot hear you. You can put the handset
back in the cradle without breaking the connection.
When you are ready to speak with them again, pickup the handset. If you did
not put the handset back in the cradle, press the HOLD key one more time.
.
4-12
BASIC OPERATIONS