Sharp UX-144 Operation Manual page 7

Table of Contents

Advertisement

Take the following points into consideration when selecting a site for your
Ux-1
14:
Environment
The machine must be installed on a level surface.
Keep the machine away from air conditioners, heaters, direct sunlight, and dust.
Provide easy access to the front, back, and sides of the machine. In particular,
keep the area in front of the machine clear, or the original document may jam as
it comes out after scanning.
The temperature should be between 5° and 35"C.
The humidity should be between 30°/0and 85°/0(without condensation).
Electricity
A 230-240 V, 50 Hz, earthed (3-prong) AC outlet is required.
If>ourarea e.rperiences a high incidence of lightning orpowersurges, we recommend that
JYouinstall a surge protector for the pov+'er a nd telephone lines. Surge protectors can be
purchased at most telephone ~pecial~'stores.
Telephone jack
A standard telephone jack must be located near the machine.
/f the machine is moved from a cold to a warm place...
If the machine is moved from a cold to a warm place, it is possible that the
reading glass may mist up due to condensation, preventing proper scanning
of documents for transmission. To remove the mist, turn on the power and
wait approximately 2 hours before using the machine.
INSTALLATION
2-1

Advertisement

Table of Contents
loading

Table of Contents