Restore; Restore Data To Main Hdd From Drive 1/2/ Export Drive 1/2 Configuration - Mitsubishi Electric DX-TL5000E Installer Manual

Restore

Restore Data to Main HDD from Drive 1/2/
Export Drive 1/2 Configuration
This item is used to restore the data from the copy device
to the main device.
System Menu
4 Restore
Restore Data to Main HDD from Drive 1/2
1
1+2
Export Drive 1/2 Configuration
2
1. Set the camera number to be restored.
step
• The button function changes between "All Off"
and "All On" each time you select this button. You
can switch on and off for all the cameras easily
by using this button.
2. Set the other detailed settings.
step
From Device: Sets the device which contains the
data to be restored. The available setting items are
"Copy 1" and "Copy 2."
From Group: Sets the group which contains the
data to be restored.
To Main: Sets the area to which the data is restored.
The available setting items are "Normal," "Alarm,"
and "LPA."
Overwrite: Selects whether or not to overwrite the
existing data.
• "Alarm" appears for "To Main" when "Alarm Recording
Area" (System Menu Memory Data Management
Setting for Main Memory Change Partition Setting)
is set to other than "0 %."
• "LPA" appears for "To Main" when "Long Pre-Alarm
Area" (System Menu Memory Data Management
Setting for Main Memory Change Partition Setting)
is set to other than "0 %."
3. Set the start or start/end points of restoring.
step
Start: Sets only the start point of restoring.
Start/End: Sets the start and end points of restoring.
• To restore the data from the oldest data, select
"Set Start Time." To restore the data to the latest
data, select "Set End Time."
4. Select "Execute."
step
• Restoring starts.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
Range of Restore
• Restore cannot be performed during recording,
playback, or copying.
• Restore is stopped at the end point of main device
regardless of the repeat recording setting of the main
device to be restored.
To start restoring again, clear the warning display, and
then delete the data or set "Overwrite" to "On."
To start normal recording, clear the warning display
4
step
first.
3
• The picture data is processed in 2 MB unit. Therefore
step
the data is restored in 2 MB unit from the start point
of the designated range when restoring.
1, 2
steps
System Menu
79