Service Info; System Log List; Elapsed Operating Time; Disk Information - Mitsubishi Electric DX-TL5000E Installer Manual

Service Info

System Log List

This item is used to check the number, date, and time of
the system log.
System Menu
3 Service Info
System Log List
1
1. Check the system log in the <System Log List>.
step
• The <System Log List> displays up to 1000 items.
When the number of items exceed this limit, the
latest 1000 items are displayed.
• When a failure occurs while the <System Log List> is
being displayed, exit the screen and display it again.
A new item will be added to the list.
• "REC ON" is registered to system log list when the
recording is started, but it is not registered when the
recording is resumed after a power failure.
• See pages 114 and 115 for the details of the listed
log.
<Operational log>
Recording front panel
rear panel
communication REC COM ON/
Simple lock
Password lock
Cancelling lock
Displaying menu
Exiting menu
Alarm recording disabled
Alarm recording enabled
Power failure
Reset
Communitaion

Elapsed Operating Time

This item is used to check the total operating time of the
system, copy 1, or copy 2 device.
System Menu
3 Service Info
2
Elapsed Operating Time
1. Check the total operating time in the <Elapsed
step
Operating Time>.
"– – – – Hr": The device is not registered for that
group.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
78
REC ON/REC OFF
REC EXT ON/
REC EXT OFF
REC COM OFF
PS-E
PS-1, PS-2, PS-3
PS-OFF, PS-4
MENU ON
MENU OFF
ALM OFF
ALM ON
P-LOSS
RESET
Name of log in user

Disk Information

This item is used to check the recording range of the main,
copy 1 or copy 2 device.
System Menu
3 Service Info
3 Disk Information
1 Disk Information (Main)
D Disk Detailed Information (Main)
Disk Information
(Copy 1 - S.Bus, NAS, SCSI,
2 to 6
DVD/CD, USBMem.)
Disk Detailed Information
(Copy 1 - S.Bus, NAS, SCSI,
D
DVD/CD, USBMem.)
Disk Information
(Copy 2 - S.Bus, NAS, SCSI,
7 to 11
DVD/CD, Internal)
Disk Detailed Information
(Copy 2 - S.Bus, NAS, SCSI,
D
DVD/CD, Internal)
1. Select "Information" of the desired device in the
step
<Disk Information>.
• "Alarm Area" appears when "Alarm Recording Area"
(System Menu Memory Data Management Setting
for Main Memory Change Partition Setting) is set to
other than "0 %."
• "LPA Area" appears when "Long Pre-Alarm Area"
(System Menu Memory Data Management Setting
for Main Memory Change Partition Setting) is set to
other than "0 %."
2. Select "Detail" to check the detailed information of
step
the device set for each area.
• When selecting "Detail," the connection name,
manufacturer, name, and size (GB unit) of the
device are displayed.
• To check the latest information, display
<Memory> menu first to check that the device is
set correctly.
System Menu
1, 2
steps