Specifications - Mitsubishi Electric DX-TL5000E Installer Manual

Specifications

Rated Power Supply:
Rated Input:
Colour System:
Operating Temperature:
Relative Humidity:
Altitude:
Dimensions:
Weight:
Recording System
Sampling
Data Compression
Compression Unit
Recording Resolution
Recording Device
Video Input:
Monitor Output:
Throughout Output:
Cascade Video Input:
Cascade Video Output:
*optional audio interface board
Audio Input:
Audio Output:
Cascade Audio Input:
Cascade Audio Output:
Clock:
Timer Program:
Memory Backup:
CONNECTORS
External storage terminal
Control terminals
Clock adjust Input
Clock adjust Output
Recording start Input
Recording stop Input
Emergency Input
Mode out +/– (1-4)
Call out +/–
Ground terminal
DC 12 V Output
Alarm Input (1-16)
Alarm Output (1-16)
PTZ terminal
Serial port
RS-485 port
Communication
LAN (A, B)
Card slot for optional board
DVD-R/RW, CD-R/RW recording format
Accessories:
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
This unit complies with the European EMC test standard EN50130-4.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Specifications
138
100 to 240 V AC, 50/60 Hz
1.0 - 0.45 A (100-240 V)
PAL-type colour system.
41 °F-104 °F (5 °C to 40 °C)
Max. 80 (%)
Max. 2000 (m)
425 (Width) x 390 (Depth) x 185 (Height) (mm)
13.4 kg
Digital recording system
13.5 MHz
JPEG2000
Frame, Field
720 x 576, 720 X 288
Hard disc drive
16 Input BNC-Connectors:
S-Connector:
2 Output BNC-Connectors:
RCA-jack:
16 Output BNC-Connectors: 1.0 V(p-p), 75 ohms.
BNC-Connector:
BNC-Connector:
4 RCA-Jacks:
RCA-Jack:
RCA-Jack:
RCA-Jack:
±20 seconds/month (when power is supplied, 25 °C)
8 programs-Daily start and stop time for one week x 2 set
Lasts for more than 1 month (when fully charged)
Serial bus (1-6)
(For connecting the recommended optional items only)
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
(Clock adjust Output is throughout of Clock adjust Input)
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active:
(Relay output) Non active:
Active:
(Photo coupler output) Non active:
Max. 350 mA DC (when Main switch and power button is turned on)
Active: When terminals are short-circuited or "Low" Level voltage is applied. Non active: Open.
Active:
Non active:
RS-232C terminal
RS-422 terminal
RS-232C D-SUB 9 pin
RS-485 Input/Output RJ-11
Connector form: RJ-45
(A for external storage, B for communication)
PCI-compliant slot type (low profile) (For connecting the recommended optional items only)
Original format
AC power cord (for U.K/for the Continent)
Screws
CD
Mouse
Cable clamping band
Ferrite core
Installer's manual (this manual)
User's manual
1.0 V(p-p), 75 ohms.
Y-Signal: 1.0 V(p-p), 75 ohms.
C-Signal: 0.3 V(p-p), 75 ohms.
1.0 V(p-p), 75 ohms.
1.0 V(p-p), 75 ohms.
1.0 V(p-p), 75 ohms.
1.0 V(p-p), 75 ohms.
308 mV(rms), 50 k ohms.
308 mV(rms), 1 k ohms.
308 mV(rms), 50 k ohms.
308 mV(rms), 1 k ohms.
Short Max. Drive current 500 mA DC.
Open. Max. Voltage 24 V DC.
Short Max. Drive current 7 mA DC.
Open. Max. Voltage 24 V DC.
"Low" Level Max. Drive current 7 mA DC.
Open. Max. Voltage 24 V DC.
Physical interface: 10BASE-T/100BASE-TX
2
8
1
1
2
1
1
1