Table of Contents
Advertisement
S206 ConneCtionS
The S206 features gold-plated binding posts that provide secure
connection for speaker cables terminated with banana plugs, spade
lugs, pin connectors or bare wire.
Amplifier
(one channel shown)
Connect both loudspeakers using the same method, using speaker
cables of the same length for each speaker.
• Review the owner's manuals for all associated audio components to
determine their correct connection procedures.
8
CARing foR youR loudSPeAkeRS
loudSPeAkeR volume levelS
The high-order filters employed in Revel Performa3 series loudspeakers
include steep cut-offs to reduce potential transducer damage from "out-
of-band" frequencies. Combined with carefully selected transducers
C206
Connector Panel
and filter network components, this approach helps the Performa3
floorstanding loudspeakers maintain their performance under extreme
operating conditions.
However, all loudspeakers have limits when it comes to continuous
playback. To avoid exceeding these limits, avoid playback at volume
levels that distort or strain the sound.
CAbinet finiSh
The cabinet's painted finish does not require routine maintenance.
Occasionally use a soft cloth that has been dampened with water to
remove any fingerprints or dust from the cabinet. Take care not to come
in contact with the transducers.
To clean the grille, gently vacuum it using a soft-bristled brush vacuum
attachment with the vacuum cleaner set to the lowest possible suction.
Revel Performa3 S206 Surround Channel Loudspeaker
CAUTION: To avoid damage, reduce volume level
immediately if the loudspeaker sound is not clean and clear.
Owner's Manual
Advertisement
Table of Contents
