Mitel 3000 Manual page 87

Mitel 3000
Broadband Module Manual
Parameter
Operational Mode
State
Trained transmit bit rate
Trained receive bit rate
Upstream power
Local/Remote fast
channel FEC error count
Local/Remote interleaved
channel FEC error count
Local/Remote fast
channel CRC
Local/Remote interleaved
channel CRC
Local/Remote line
attenuation
Local/Remote signal-to-
noise margin
Local/Remote LOS
Local/Remote SEF
84
Description
Inactive – the line is disconnected or the DSL modem is
negotiation with the DSLAM
G.DMT or T1.413 - indicates the DSL standard that has been
negotiated with the DSLAM
Showtime – the line is synchronised and the ADSL connection is
successfully established
Training - the ADSL modem is negotiating line speed with the
DSLAM
Handshake - the handshaking procedure is taking place to
determine the nature and capabilities of the endpoints
The upstream line speed
The downstream line speed
The output power of the ADSL modem
The fast channel Forward Error Correction error count measured
at the near/far end
The interleaved channel Forward Error Correction error count
measured at the near/far end
The fast channel Cyclic Redundancy Check error count
measured at the near/far end
The interleaved channel Cyclic Redundancy Check error count
measured at the near/far end
The line loss measured at the near/far end
The signal-to-noise ratio measured at the near/far end
The number of occurrences of Loss of Signal at the near/far end
The number of Severely Errored Frames received at the near/far
end