Additional Endpoint Options - Mitel 3000 Manual

Broadband module

Hide thumbs Also See for 3000:

Table of Contents

Mitel 3000

Broadband Module Manual

Enter the Username and Password for each trunk

Click Next >.

Select Confirm Changes.

Additional Endpoint Options

There are three additional parameters for each IP Endpoint. Your VoIP service provider will

provide you with the necessary information to program these options.

Select Change VoIP Endpoint additional options here...on the VoIP screen.

Enable Silence Suppression

This applies to IP trunks only. It is disabled by default. Turning Silence suppression on can

reduce the bandwidth used on VoIP calls.

Enable RFC2833

This applies only to IP trunks, and is disabled by default. It should be turned on if the VoIP

service provider requires this protocol to support the sending of tones during a call.

Table of Contents