Mitel 3000
Broadband Module Manual
Select Create new IP V4 route...
Enter the following parameters:
- Destination IP address.
- Gateway IP address.
- Netmask
- Cost – this sets the number of hops counted as the cost of the route.
- Interface – choose from the following:
ipwan
ipdmz
iplan
None
- Advertise – true or false.
Select OK.
The list of routes is displayed again.
DHCP S
ERVER
Select DHCP Server in the Advanced Configuration menu.
The DHCP Server is displayed.
Enable/Disable
The DHCP server is enabled by default.
78