Connecting To The Programming Interface; Connecting To The Programming Interface From A Pc Connected To The Lan - Mitel 3000 Manual

Mitel 3000
Broadband Module Manual
C
ONNECTING TO THE PROGRAMMING INTERFACE
The Broadband Module Programming and Maintenance pages can be accessed from: -
- A PC Connected to the LAN (see note below concerning the Wireless LAN)
- The MPS application.
The MPS application is the Management and Programming
application on the CD supplied with the system
Note

Connecting to the programming interface from a PC connected to the LAN

To connect to the Programming and Maintenance pages launch the browser on any PC
connected to the LAN.
Enter http://192.168.1.1
Enter Username (admin) and Password (admin).
If the log on screen does not appear please refer to page 87.
Note
The Basic Configuration screen is displayed.
In order to provide maximum security, PCs connected to the Wireless LAN are not
allowed to program the module via the web interface. If you wish to program from a
wireless PC the WLAN interface should be relocated on the LAN. See page 53.
Note
8
OR
in the address field and press return.