Table of Contents
Advertisement
H
IMPORTANT! Use only a Power Wheels
with a Power Wheels
25 Amp fuse installed. Use of any other
®
battery or fuse will damage your vehicle. Make sure that you
charge the battery for at least 18 hours using the enclosed
Power Wheels
®
6 Volt charger before operating your vehicle for
the first time. Charge the battery for at least 14 hours after each
use of the vehicle. Never charge the battery longer than 30
hours. Failure to follow these instructions may damage your
battery and will void your warranty.
1
Locked
• Locate the lock fasteners in the back of the seat.
• Using a slotted screwdriver, turn each lock fastener
/
turn to the unlocked
1
4
2
• Lift the seat to remove it from the vehicle body.
Battery Installation
Type H 6 volt battery
®
Lock
Fasteners
Unlocked
position.
3
Battery
Clamp
Seat
Battery
Compartment
• While pressing the vehicle body tab, lift the edge of the
battery clamp.
• Place a Power Wheels
compartment, as shown.
4
Seat
Battery
Clamp
• Rotate the battery clamp down until it "snaps" into place.
Pull up on the battery clamp to be sure it is secure.
24
Battery
6 volt battery upright in the battery
®
Advertisement
Table of Contents
