Table of Contents
Advertisement
35
• Fit a .354 black cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
steering column.
Hints:
- You may need the help of another adult to keep these two
parts in the correct position.
- You may want to position the steering column on a scrap
block of wood to protect the assembly surface.
36
Curved End
of Steering
Column
Large Hole
Small
Rectangular
Opening
• With the large opening in the steering wheel upright, fit the
curved end of the steering column down into the large hole
in the windshield.
• Continue to insert the curved end of the steering column
through the small, rectangular opening in the floor of
the vehicle body.
Assembly
Cap Nut
Steering
Column
Windshield
37
Steering
Column
2nd Bend
• Turn the vehicle body on its side, so that the bottom faces you.
• Position the steering bracket behind the steering linkage,
as shown.
• Fit the steering column through the hole in the steering
bracket to the second bend.
38
• Fit the end of the steering column through the hole in the
steering linkage
A
• Turn the steering bracket and fit it into place
20
Bottom View
B
A
Bottom View
.
B
Steering
Bracket
Steering
Linkage
Steering
Bracket
Steering
Column
Steering
Linkage
.
Advertisement
Table of Contents
