Advertisement
• Locate the battery compartment
door on the sounds and lights box.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert two, "AAA" (LR03) alkaline
batteries, as indicated inside the
battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds or lights from this toy
become faint or stop, it's time for an
adult to change the batteries!
4
Battery Installation
Battery
Compartment
Door
1.5V x 2
"AAA" (LR03)
Shown Actual Size
• Do not mix old and new batteries.
• Do not mix different types of batteries:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Battery leakage and corrosion can
damage this toy. Dispose of
batteries safely.
• Do not dispose of batteries in a fire.
The batteries may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to
be recharged.
• Only batteries of the same or
equivalent type as recommended in
the "Battery Installation" instructions
are to be used.
• If removable rechargeable batteries
are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed
from the toy before they are charged.
• If you use a battery charger, it should be
examined regularly for damage to the
cord, plug, enclosure and other parts. Do
not use a damaged battery charger until
it has been properly repaired.
Advertisement
