Table of Contents
Advertisement
5
• Insert a Power Wheels
®
25 amp fuse into the battery.
Note: The top of the fuse will not be flush with the top of the
battery when properly installed.
6
Charger
Connector
• Plug the charger connector into the battery connector.
Battery Charging
25 Amp Fuse
Charger
Battery
Connector
10
7
• Plug the charger into a standard 120 volt wall outlet.
Note: If power flow to the wall outlet is controlled by a switch,
make sure the switch is ON.
• Before first time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
Note: The battery must be upright while charging.
• Recharge the battery after each use of your vehicle for
at least 14 hours. Do not charge the battery longer than
30 hours.
• Once the battery is charged, disconnect the charger
connector from the battery connector. Unplug the charger
from the wall outlet. The battery is now ready to be installed
in your vehicle. Please see "Battery Installation" on page 24
for detailed instructions on installing your battery. If your
battery is already installed in your vehicle, simply re-connect
the battery connector and motor harness connector and
re-assemble the seat.
Advertisement
Table of Contents
