General control
2.1
VOL
–
To turn the power on
Press the ON/STAND-BY button to turn the power on. The
POWER and E
indicator will turn on.
SOUND
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode. The POWER indicator will turn off.
Note:
This unit consumes low current during stand-by mode. However,
please remove the batteries if the unit will not be used for a long
period of time.
STEREO SPEAKER
BUILT-IN SUBWOOFER
VOL
+
Volume control
Press the VOL (+ or –) button to increase or decrease the
volume.
POWER indicator will be blinking when the volume reaches
maximum or minimum level.
E
control
SOUND
When ON/STAND-BY button is pressed, the E
turns yellowish orange. You are now in the E
where low bass and high frequency are automatically adjusted
according to the volume input.
To turn off E
, press the E
SOUND
E
indicator will go off.
SOUND
indicator
SOUND
mode,
SOUND
(-TV OUT) button. The
SOUND
DK-AP7N(R)
DK-AP7N(S)
DK-AP7N(W)
ENGLISH
E-8