Advertisement
MAKING
BURNER ADJUSTMENTS
c
If you are usin
L P (bottled)
gas
all the adjustments
described
on t e previous
page must be made before
you mahe any burner adjustments
or use the range.
All ran es are factory adjusted for use with the natural gas used In most
areas. If ut, since the gas in some areas may vary, you should check all
adjustments
described
below and on the next page. H you
are
urlng L.P.
gas. all the adjustments
muat be made.
Step 1: Adjubt Alr Shuttm
Turn all burners full on and check the flames. Burner flames should not
flutter or blow awa
from the burner. They should be blue in color wlth
no trace of yellow.
n particles
in the gas line may cause an orange
flame at first, but this wil soon dlsappear.
If the flames are yellow or flutter, open the air shutter more.
To adjust alr rhutters:
Cooktop burners, Fig. A4-use
plfers to adjust the alr shutter. Be sure to
keep the gap In the air shutter over the closed portlon of the burner
tube. Be very careful not to bend the alr ahuttw
when using ptkn
to
make adlustments.
Oven/broiler
burners, Fig. AS-use
a screwdrlver
to loosen the alr shut-
ter screw. Adjust air shutter and retlghten the air shutter screw.
Advertisement
