Download  Print this page

Maytag 336125 Use And Care Manual page 8

Drop-in self cleaning
Hide thumbs

Advertisement

TO START NOW AND STOP LATER
1.
Push COOK TIME button.
2.
Set length fo bakrng time with SET knob
3.
Push BAKE button.
4.
Set desired temperature
with SET button
5.
When COOK TIME is reached, the end of cycle tone will sound and
the oven will turn off.
Note: You can push the STOP TIME button to find out when the end of
cycle will sound and the oven will turn off.
TO START LATER AND STOP LATER:
1.
Push COOK TIME button
2
Set length of baking time with SET knob
3
Push BAKE button.
4
Set desired temperature
with SET knob
5
Push STOP TIME button
6
Set time of day when baking should be completed
with SET knob.
7. When STOP TIME is reached, the end of cycle tone will sound and
the oven will turn off
Note: You can push the STOP TIME button to find out when the oven WIII
turn off. Push and hold the COOK TIME button to find out when the oven
will turn on.
When a function has been entered, you can recall what has been pro-
grammed by pushing the corresponding
function button. The messages
in the display show you which function is currently bern
the functron is displayed, you can change it with the S P
displayed. While
T knob. You can
change any programmed
function at any time.
Never slide the door locldunlock
handle into the LOCK position while try-
ing to bake or broil. You will not be able to program you oven to bake
or broil if the oven door is locked. If you try to lock the door while the oven
is on, the oven will immediately turn off.
TONES
End of Cycle Tone (3 long beeps
one second on, one second offj shows
that a timed oven operation has reached STOP TIME or that the Timer
has counted down.
Attention Tone (series of short beeps, one quarter second on, one quarter
second off, until proper response IS given), will sound if oven has only been
partially programmed.
For example, If you have selected a COOK TIME
but no temperature,
you will hear the attention tone until you select a
temperature
or push OVEN CANCEL
Notification
Tone (srngle, one second beep) shows that the oven has
stablrzed at the selected temperature
Keystone
(single, one tenth second beep). sounds when any button IS
pushed.
Failure Tone (series of very rapid beeps, one ergth second on. one quarter
second off): drsplay will show FO-FE. Cancel failure tone by pushing the
OVEN CANCEL. If failure occured while you were programming the ELEC-
TRIC Range Control, push the OVEN CANCEL button and try agarn If
you stall get a failure tone thal does not stop after 16 seconds, call for ser-
vice If you are unable to cancel the farlure tone wrth the OVEN CANCEL
button, unplug the range or drsconnect the crrcuit breaker
If you prefer that your range not have an audtble tcne at the end of a cycle
or when you push a button (Key Tone), you can elrmlnate the End of Cy~
cle and Key Tone by pushing and holding the OVEN CANCEL button un-
til you hear a short beep (in approximately
two seconds). If you wish to
activate the tones again, push and hold the OVEN CANCEL button once
more until you hear a short beep. Cancelling or activating the tones should
only be done when there is no oven operation programmed.
Pushing the
OVEN CANCEL button wrll clear all functrons except the clock and Timer

Advertisement

loading

  Related Manuals for Maytag 336125