Table of Contents
Advertisement
IMPORTANT! Use only a Power Wheels
and built-in thermal fuse. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least
18 hours using the enclosed Power Wheels
before operating your vehicle for the first time. Charge the battery
for at least 14 hours after each use of the vehicle. Never charge the
battery longer than 30 hours. Failure to follow these instructions may
damage your battery and will void your warranty.
Unlocked
1
• Locate the lock fasteners in the back end of the seat.
• Using a slotted screwdriver, turn the lock fasteners
unlocked position
.
2
• Lift the seat to remove it from the vehicle.
L1114pr-0920
BATTERY INSTALLATION
®
6 volt Type H battery
®
6 volt Type H charger
Lock
Fasteners
1
/
turn to the
4
Seat
Battery
Retainer
Seat
Battery
3
Compartment
• While pressing the vehicle tab, lift the
edge of the battery retainer.
• Place a Power Wheels
upright in the battery compartment, as shown.
Battery
Retainer
4
• Rotate the battery retainer down until it "snaps" into place. Pull up
on the battery retainer to be sure it is secure.
Battery
®
6 volt battery
H
Battery
Retainer
23
L1114pr-0920
Advertisement
Table of Contents
