Table of Contents
Advertisement
Gearbox
Barrel Side
Barrel Side
2
• Fit a round bushing, barrel side first, into the hole inside the
battery compartment.
• Position the gearbox with the teeth outward. Fit the gearbox through
the large opening in the side of the battery compartment.
L1114pr-0920
ASSEMBLY
Teeth
Large
Opening
Hole
Round
Bushing
Hole
Round
Bushing
Assembly
Tool with Lock
Washer Inside
Rectangular
Bushing
Rear Axle
3
• Fit a rectangular bushing, base end up, onto the rear axle.
• Position a hubcap, ridges down, onto the rear axle.
• Fit a lock washer, rounded side up, into the assembly tool. Make
sure it fits completely inside the assembly tool.
• Position the rear axle with the hubcap up, as shown. Fit the
assembly tool (with lock washer in it) onto one end of the rear axle.
• Tap the assembly tool with a hammer to secure the lock washer on
the end of the rear axle.
Hint: You may want to position the rear axle on a scrap block of wood
to protect the assembly surface.
• Pull on the lock washer to be sure it is secure on the rear axle.
Lock Washer
Rounded Side UP
Hubcap
Assembly Tool
Base End Up
Base End Up
F
11
Advertisement
Table of Contents
