Fisher-Price Volkswagen NEW BEETLE L1114 Owner's Manual & Assembly Instructions page 19

Steering Wheel
Left
Spoke
Label 30
Bottom
Spoke
33
Label 32
• Cut the steering wheel labels (#30, #31 and #32) from the larger
label sheet. Now, position the steering wheel labels, as shown in the
illustration, around the steering wheel.
Hint: These labels will be applied around the spokes on the steering
wheel. Carefully apply the center portion of each label to the topside of
each spoke. Gently smooth the label around each spoke.
• Remove the backing from label 30 and apply the label to the left spoke.
• Remove the backing from label 32 and apply the label to the
bottom spoke.
• Remove the backing from label 31 and apply the label to the right spoke.
Large Opening Upright
Steering Wheel
34
• Position the steering wheel with the large opening upright.
• Position the steering column so that the bend is upright, as shown.
• Fit the steering column through the center hole in the steering wheel.
L1114pr-0920
ASSEMBLY
Right
Spoke
Label 31
35
• Fit a .354 black cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the steering column.
Hints:
Steering Column
Bend
36
Upright
• With the large opening in the steering wheel upright, fit the curved
• Continue to insert the curved end of the steering column through the
.354 Black
Cap Nut
Steering
Column
- You may need the help of another adult to keep these two parts in
the correct position.
- You may want to position the steering column on a scrap block of
wood to protect the assembly surface.
Curved End
of Steering
Column
Windshield
Large Hole
Small
Rectangular
Opening
end of the steering column down into the large hole in the windshield.
small, rectangular opening in the floor of the vehicle.
F
.354"
19