Table of Contents
Advertisement
24
• Fit a
5
/
" large washer onto each front axle.
16
25
Ribs
INSIDE
OF WHEEL
• Identify the inside and the outside of a wheel.
• The inside of the wheel has ribs on its surface. The outside of the
wheel has a smooth surface.
Barrel Side
Barrel Side
Round
Bushing
Inside
of Wheel
26
• Fit a round bushing, barrel side first, into the hole in the inside of a
wheel (ribbed side).
• Fit a hex bushing, barrel side first, into the hole in the outside of a
wheel (smooth side).
• Repeat this procedure to insert a round bushing and hex bushing
into the remaining wheel.
L1114pr-0920
ASSEMBLY
Front Axle
Large
Washer
Smooth Surface
OUTSIDE
OF WHEEL
Barrel Side
Barrel Side
Hex
Bushing
Outside
of Wheel
Front
Axle
27
• Fit the wheel (with a round bushing and hex bushing inserted) onto
the end of the front axle. Make sure the outside of the wheel (smooth
side) faces out.
• Fit a hubcap to the outside of the wheel. Make sure the peg on the
hubcap fits into the small hole in the outside of the wheel.
Assembly
Tool with Lock
Washer Inside
Front
Axle
28
• Turn the vehicle on its side.
• Fit the lock washer, rounded side up, into the assembly tool. Make
sure it fits completely inside the assembly tool.
• Fit the assembly tool (with lock washer in it) onto the end of the
front axle.
• Tap the assembly tool with a hammer to secure the lock washer on
the end of the front axle.
• Pull the wheel up to be sure it is secure on the front axle.
Outside of Wheel
Hubcap
Peg
Small Hole
Lock Washer
Rounded Side UP
Assembly Tool
F
17
Advertisement
Table of Contents
