Table of Contents
Advertisement
AdonisC3_GBzenF3_FM.book Page 75 Wednesday, February 26, 2003 10:55 AM
To program a SEP Code
A Press [Adv. Features], and then
select [SEP Code].
B Press [Change] under RX SEP
Code.
C Enter a SEP Code with the
number keys, and then press
[OK].
D To enter a password, press
[Change] under Pass word
(PWD).
E Enter a password using the
number keys, and then press
[OK].
F Press [OK].
Setting the International TX mode
A Press [Change] under Interna-
tional TX Mode.
B Select [OFF] or [ON], and then
press [OK].
To select the fax header
Note
❒ You can register the fax header
name in Program Fax Informa-
tion under the system settings
of Facsimile Features. See Fac-
simile Reference <Advanced Fea-
tures>.
A Press [Change] under Fax Head-
er.
B Select [1st Name] or [2nd Name],
and then press [OK].
Setting label insertion
When Label Insertion is set ON,
the receiver's name and standard
messages will be printed on the fax
message when it is received at the
other end.
A Press [Change] under Label In-
sertion.
B Select [ON].
C Press [Change] under Line 2.
D Select a standard message to
print on the second line. To
stamp a customized message,
press [Custom Message].
E Enter the message, and then
press [OK].
Reference
p.131 "Entering Text"
F Press [OK].
G Press [Change] under Line 3.
H Select a standard message, and
then press [OK].
I Press [OK].
I I I I
Press [OK].
Note
❒ When a group is registered, you
can add this fax destination to
the group. See p.82 "Registering
Destinations to a Group".
Fax Destination
4
75
Advertisement
Table of Contents
