Savin 4035 Settings Manual page 47

AdonisC3_GBzenF3_FM.book Page 31 Wednesday, February 26, 2003 10:55 AM
*1
Simultaneous operations are only possible once the preceding job documents are all
scanned and [Next Job] appears.
*2
You can scan a document once the preceding job documents are all scanned.
*3
Simultaneous operations are only possible with an additional line installed and
when the facsimile function is not using the line given line priority in the facsimile
settings.
*4
During stapling, printing automatically starts after the current job.
*5
Stapling is not available.
*6
Simultaneous operations become available after you press [Next Job].
*7
During parallel reception, any subsequent job is suspended until reception is com-
pleted.
Limitation
❒ Stapling cannot be used at the same time for multiple functions.
Note
❒ A machine with the 1000-Sheet finisher installed, that is printing with the sta-
pling operation on paper larger than A4 size starts the subsequent job (for
which the finisher shift tray is specified as the output tray) only after the cur-
rent print job finishes.
❒ While printing is in progress, scanning a document using another function
may take more time.
Multi-Access
2
31