Savin 4035 Settings Manual page 71

AdonisC3_GBzenF3_FM.book Page 55 Wednesday, February 26, 2003 10:55 AM
Important
❒ If the specified paper size differs from the size of paper actually set in the
paper tray, a paper misfeed might occur because the paper size is not de-
tected correctly.
Note
❒ The tray fence for the optional LCT is fixed. If you need to change the paper
size, contact your service representative.
❒ If the paper size set for the dial in the paper tray is different to the paper
size for this setting, the paper size of the dial has priority.
❒ If you load paper in the paper tray that is not available on the paper size
dial, set the dial to "p".
Reference
p.108 "Changing the Paper Size"
❖ ❖ ❖ ❖ Paper Type: Bypass tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
• The paper types you can set for the bypass tray are as follows:
• recycled paper, special paper, colour paper, letterhead, label paper,
punched paper, bond paper, cardstock, thick paper, OHP
Note
❒ Default: No display
❖ ❖ ❖ ❖ Paper Type: Tray 1–4
Sets the display so you can see what type of paper is loaded in each of the pa-
per trays. This information is used by the print function to automatically se-
lect the paper tray.
• The paper types you can set are as follows:
• recycled paper, special paper, colour paper, letterhead, preprinted pa-
per, punched paper, bond paper, cardstock
Note
❒ Default:
• Paper Type: No display
• Copying Method: 2 Sided Copy
• Apply Auto Paper Select: Yes
❒ When paper of the same type and size are loaded in two different paper
trays and you want to specify one as 2 Sided Copy and one as 1 Sided
Copy, specify the upper one as 2 Sided Copy. If one of the trays is specified
as the default in Paper Tray Priority, assign 2 Sided Copy to that tray.
❒ A
is displayed next to the paper tray if [No] is selected in Auto Paper Se-
lect.
Settings You Can Change with User Tools
4
55