Savin 4035 Settings Manual page 69

AdonisC3_GBzenF3_FM.book Page 53 Wednesday, February 26, 2003 10:55 AM
3.
Finisher shift tray 1
4.
Finisher shift tray 2
5.
Finisher upper tray
Note
❒ Default: Internal tray 1
❖ ❖ ❖ ❖ Output: Document Server (Document Server)
You can specify a tray to which documents are delivered.
Note
❒ Default: Internal tray 1
❒ For details about output trays, see p.52 "Output: Copier (copier)".
❖ ❖ ❖ ❖ Output: Facsimile (facsimile)
You can specify a tray to which documents are delivered.
Note
❒ Default: Internal tray 2
❒ For details about output trays, see p.52 "Output: Copier (copier)".
❖ ❖ ❖ ❖ Output: Printer (printer)
You can specify a tray to which documents are delivered.
Note
❒ Default: Internal tray 1
❒ The output trays set on the printer driver have priority over the output tray
specified above.
❒ For details about output trays, see the illustration on p.52 "Output: Copier
(copier)".
❖ ❖ ❖ ❖ Prepare Stapling
When the booklet finisher is installed, perform a stapling test (five to seven
times) after replacing staples for saddle stitching, or removing jammed sta-
ples.
Note
❒ The display for this setting appears only when the booklet finisher is in-
stalled. See p.115 "Using "Prepare Stapling "in User Tools to initialize the
staple unit".
❖ ❖ ❖ ❖ <F/F4>Size Setting
Currently three types of F size are available; 8
8"×13"L. The Auto Document Feeder (ADF) or exposure glass cover sensor
cannot distinguish these three types of originals. This function sets the F size
from the ADF or exposure glass cover sensor. Auto Paper Select or Auto Re-
duce/Enlarge can be used for F size originals based on this setting.
Settings You Can Change with User Tools
6.
Finisher shift tray
7.
Internal tray 1
8.
Internal tray 2
1 1
/ "×13"L, 8
2
4
/ "×13"L and
4
53