Savin 4035 Settings Manual page 35

AdonisC3_GBzenF3_FM.book Page 19 Wednesday, February 26, 2003 10:55 AM
{ { { { Interrupt} } } } key (copier mode)
9.
Press to make interrupt copies during a
copy run. See "Interrupt Copy", Copy Ref-
erence.
10.
Main power indicator and pow-
er indicator
The main power indicator goes on when
you turn on the main power switch.
The power indicator lights when the
power is on.
Important
❒ Do not turn off the main power
switch while the power indicator is
lit or blinking. Doing so may dam-
age the hard disk.
11.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
{ { { { Sample Copy} } } } key
12.
Press to make a single set of copies or
prints to check for poor copying or print-
ing before making multiple sets.
{ { { { Start} } } } key
13.
Press to start copying, scanning, or print-
ing documents stored in the Document
Server.
{ { { { Clear/Stop} } } } key
14.
• Clear
Press to delete a number entered.
• Stop
Press to stop a job such as scanning,
faxing, or printing in progress.
{ { { { #} } } } key
15.
Press to enter a value.
16.
Number keys
Use to enter the desired number of cop-
ies, fax numbers and data for selected
modes.
{ { { { Start Manual RX} } } } key, { { { { On Hook Di-
17.
al} } } } key, { { { { Pause/Redial} } } } key, and
{ { { { Tone} } } } key
Reference
Facsimile Reference <Basic Features>
and Facsimile Reference <Advanced
Features>
18.
Function keys
Press to select the following functions:
• Copy:
• Document Server:
• Facsimile:
• Printer:
• Scanner:
19.
Function status indicator
These show the status of the above func-
tions:
• Yellow: the function is selected.
• Green: the function is active.
• Red: the function has been interrupt-
ed.
Control Panel
1
19