Dialing; Number Keys - Savin 1027 Facsimile Reference Manual

Dialing

There are two main ways to dial a
number:
❖ ❖ ❖ ❖ Number keys:
Enter numbers directly using the
key pad on the right side of the op-
eration panel.
❖ ❖ ❖ ❖ Quick Dials:
When you have programmed a
destination's number in a Quick
Dial key, you can dial the number
by just pressing that key. Addi-
tionally, you can store a name that
will appear on the display when-
ever you press that Quick Dial.
This section covers these features and
others in more detail.

Number Keys

Enter numbers directly using the key
pad on the right side of the operation
panel.
Note
❒ Maximum length of a fax number:
254 digits.
❒ You can insert pauses and tones in
a fax number. ⇒ p.42 "Pause", p.43
"Tone"
❒ If the optional ISDN Unit is in-
stalled, you may need to enter a
sub-address. ⇒ Chapter 4, "Sub-
address" in the Advanced Features
manual
A A A A
Enter the fax number with the
number keys.
The digits appear on the display as
you enter them.
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key or [Clear] and
enter again.
❒ If the optional ISDN Unit or the
optional Extra G3 Interface Unit
Connector is installed, select G3
or G4 before you press the
{ { { { Start } } } } key. ⇒ Chapter 4,
"Changing the Line Type" in the
Advanced Features manual
Dialing
2
41