Placing A Single Original On The Exposure Glass - Savin 1027 Facsimile Reference Manual

- How to place A4, B4, A3, LT, LG -
- -
and DLT size originals
Note
❒ When you place originals in the
ADF as shown in the above illus-
tration, the Fax Header will be
printed on the received faxes at the
destination as follows:
• *1 On the top of the fax
• *2 On the left side of the fax
- - - How to place A4, A5,HLT and -
B5 size originals
Limitation
❒ A5,HLT size documents are not
detected on the exposure glass.
Place A5,HLT size documents in
the ADF.
Note
❒ When you place originals on the
ADF as shown in the above illus-
tration, the Fax Header will be
printed on the received faxes at the
destination as follows:
• *1 On the top of the fax
• *2 On the left side of the fax
Placing a Single Original on
the Exposure Glass
Place originals that cannot be placed
in the Document Feeder (ADF), such
as a book, on the exposure glass one
page at a time.
A A A A
Lift the Document Feeder (ADF)
by at least 30 degrees. Place the
original face down and align its
upper left corner with the refer-
ence mark at the upper left corner
of the exposure glass.
1.
Reference mark
2.
Scale
Note
❒ If you do not raise the Docu-
ment Feeder (ADF) by at least
30 degrees, the original size will
not be detected.
Placing Originals
2
19