Placing Originals In The Document Feeder (Adf) - Savin 1027 Facsimile Reference Manual

Faxing
B B B B
Close the Document Feeder (ADF).
Note
❒ When setting a bound original, the
received image may contain some
black areas. To reduce this effect,
hold down the original to prevent
its bound part from rising.
2
- Bound Original Page Order -
- -
When setting bound originals (books,
magazines, etc.), you can choose to
have either the left page or right page
sent first. ⇒ Chapter 4, "Book Fax" in
the Advanced Features manual
Note
❒ You can choose whether the left
page or right page is sent first. ⇒
Chapter 8, "Changing the User Pa-
rameters" in the Advanced Fea-
tures manual
Placing Originals in the
Document Feeder (ADF)
Use the Document Feeder (ADF) to
scan in a stack of originals in one op-
eration. The Document Feeder (ADF)
can handle both single-sided and
double-sided originals.
Limitation
❒ The maximum document length is
1200mm (47").
❒ Place all the originals to be sent in
a single stack.
❒ You cannot place originals in the
Document Feeder (ADF) one page
at a time or in sheaves.
❒ Do not open the Document Feeder
(ADF) while it is scanning the orig-
inals or a document could become
jammed.
20
Note
❒ If you send documents longer than
420mm (17"), select Long Docu-
ment mode with the User Parame-
ters. If a jam occurs, the document
might be damaged because scan-
ning will not stop. ⇒ p.21 "Setting
a Scan Area" ⇒ Chapter 8, "Chang-
ing the User Parameters" in the
Advanced Features manual
❒ Documents longer than 432mm
(17") must be sent by memory
transmission (immediate transmis-
son is not possible).
❒ If an original jams, press the { { { { Clear/
Stop} } } } key then remove the original
carefully.
❒ If your original is bent or folded,
flatten it before you place it.
❒ Place thin originals on the expo-
sure glass.
Reference
For information about the sizes
and number of originals that can
be placed in the Document Feeder
(ADF), ⇒ Appendix, "Acceptable
types of Originals" in the Ad-
vanced Features manual