Quick Dials - Savin 1027 Facsimile Reference Manual

Faxing

Quick Dials

When you have programmed a destina-
tion's number in a Quick Dial table, you
can dial the number by just selecting the
destination from the Quick Dial table.
Additionally, you can store a name
2
that will appear on the display when-
ever you press that Quick Dial.
Preparation
You must program the fax number
of a destination for the Quick Dial
table prior to using Quick Dial.⇒
p.54 "Programming Quick Dials"
Note
❒ When you press the title key above
the destination keys, the destina-
tion keys programmed in that title
key appear.
❒ To check the contents of Quick Di-
al, print the Quick Dial list. ⇒
Chapter 7, "Reports/Lists" in the
Advanced Features manual
❒ A stored name can be printed out
on the first page of a received fax at
the other end. ⇒ Chapter 4,
"Transmission Options" in the Ad-
vanced Features manual
Reference
⇒ p.41 "Dialing"
A A A A
Place your original and select any
scan settings you require. ⇒ ⇒ ⇒ ⇒ p.36
"Scan Settings"
B B B B
Press the title key for the table
with the desired destination key.
44
C C C C
Press the destination key. If the
desired destination key is not
shown, press [U U U U ] and [T T T T ] to look
through the table.
Note
❒ To cancel a selected destination,
press that destination again.
❒ If you wish to dial another des-
tination, press [Add] and repeat
steps B and C.
D D D D
Press the { { { { Start} } } } key.
- Changing Display Method -
- -
A Press [Dest. Management].
B
Press [Switch Display].
C Select [Display Quick Dial Tbl] or [Dis-
play Number Keys].
D Press [OK].
Note
❒ To cancel the change, press
[Cancel]. The display appears as
in step B.
E Press [Exit].
❖ ❖ ❖ ❖ Quick Dial Table