Getting Started
Reading the Display
The display tells you the machine status and guides you through operations.
1
Note
❒ Functions that have been selected are highlighted (for example
Keys that you cannot select are shown with a dashed outline (for example
❒ All procedures in this manual assume you are in Facsimile mode. By default,
when you turn the machine on, it is in Copy mode. Press the { { { { Facsimile} } } } key
to change to Facsimile mode. You can have the machine start in Facsimile
mode. ⇒ "Changing the Machine's Settings" in the Copy Reference
Reading the Display Panel and Using Keys
Note
❒ When optional components are not installed, the display is as below. If op-
tional components are installed, the display changes.
❖ ❖ ❖ ❖ Facsimile standby mode
A
Displays the scanning conditions and sizes you can choose.
B
Displays the name and facsimile number of a destination when transmitting.
Also displays the size of the original.
C
Displays the entered number of a destination. When adding destinations with
the number keys, press [Add].
D
Displays messages and the machine status.
E
Press to display various information about transmission.
12
).
).