If The Machine Cannot Detect The Size Of Your Original - Savin 1027 Facsimile Reference Manual

If the Machine Cannot Detect the Size of Your Original

If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
A A A A
Press [Exit].
B B B B
Remove the original and replace it on the exposure glass.
C C C C
Press the { { { { Start} } } } key to scan the original again.
If the above display appears again, repeat steps A to C.
Note
❒ If the machine still cannot detect the original size, the following display is
shown:
❒ If this happens, carry out the following steps.
• Press the key to switch the scan size.
• Press the { { { { Start} } } } key again.
Placing Originals
2
23