Scan Settings; Resolution - Savin 1027 Facsimile Reference Manual

Faxing

Scan Settings

You may wish to send many different
types of fax messages. Some of these
may be difficult to reproduce at the
other end. However, your machine
has three settings that you can adjust
2
to help you transmit your document
with the best possible image quality.
❖ ❖ ❖ ❖ Resolution:
Standard, Detail, Super Fine (op-
tion)
❖ ❖ ❖ ❖ Image density:
Auto Image Density, Manual Im-
age Density (7 levels)
❖ ❖ ❖ ❖ Original Type:
Text, Text/Photo, Photo

Resolution

Images and text are scanned into the
machine by converting them to se-
quences of dots. The frequency of
dots determines the quality of the im-
age and how long it takes to transmit.
Therefore, images scanned at high
resolution (Super Fine) have high
quality but transmission takes longer.
Conversely, low resolution (Stand-
ard) scanning results in lower quality
but your original is sent more quick-
ly. Choose the setting that matches
your needs based upon this trade off
between speed and image clarity.
❖ ❖ ❖ ❖ Standard (8× × × × 3.85lines/mm, 200× × × × 100dpi)
Select for originals containing nor-
mal sized characters.
❖ ❖ ❖ ❖ Detail (8× × × × 7.7lines/mm, 200× × × × 200dpi)
Select for originals containing
small characters or when you re-
quire greater clarity. This resolu-
tion is twice as fine as Standard.
36
❖ ❖ ❖ ❖ Super Fine (optional Expansion Mem-
ory required: 16 × × × × 15.4lines/mm,
400× × × × 400dpi)
Select for originals with very fine
details or when you require the
best possible image clarity. This
resolution is eight times as fine as
Standard.
Limitation
❒ If the other party's machine does
not support the resolution at
which you are sending, this ma-
chine automatically switches to a
resolution which is supported.
❒ Sending with Super Fine resolu-
tion requires that your machine
has the optional Expansion Memo-
ry and the other party's machine
has the capability to receive fax
messages at Super Fine resolution.
❒ Note that even if the option is in-
stalled on your machine, transmis-
sion and reception may take place
using Detail resolution if the other
party's machine does not support
this feature. ⇒ Chapter 4, "Printed
Report" in the Advanced Features
manual
Note
❒ You can choose whether the reso-
lution is set to Standard, Detail or
Super Fine (Option) when the ma-
chine is turned on or modes are
cleared. Use the [Gen. Settings/Ad-
just] key. ⇒ Chapter 7, "General
Setting/Adjustment" in the Ad-
vanced Features manual
❒ The resolution returns to the de-
fault setting after every transmis-
sion. You can change this with the
[Gen. Settings/Adjust] key. ⇒ Chap-
ter 7, "General Setting/Adjust-
ment" in the Advanced Features
manual