Placing Originals On The Exposure Glass; Placing Originals In The Document Feeder - Savin 2565 Copy Reference Manual

Placing Originals on the
Exposure Glass
Reference
Related Initial Settings ⇒ p.108
"Eject Copy Face Up/Down in
Glass"
A A A A
Lift the exposure glass cover or
the document feeder.
Important
❒ Do not open the exposure glass
cover or the document feeder
forcefully. Otherwise, the cover
of the document feeder might
open or be damaged.
Note
❒ Be sure to open the exposure
glass cover or the document
feeder by more than 30°. Other-
wise, the size of the original
might not be detected correctly.
B B B B
Place the original face down on the
exposure glass. The original should
be aligned to the rear left corner.
1.
Reference mark
2.
Left scale
Note
❒ Start with the first page to be
copied.
C C C C
Lower the exposure glass cover or
the document feeder.
Placing Originals in the
Document Feeder
Settings should be made in the fol-
lowing situations:
❖ ❖ ❖ ❖ When placing originals one by one:
⇒ p.15 "SADF mode"
❖ ❖ ❖ ❖ When placing originals consisting of
more than 100 pages:
⇒ p.14 "Batch mode"
❖ ❖ ❖ ❖ When copying originals of various
sizes:
⇒ p.15 "Mixed Size mode"
❖ ❖ ❖ ❖ When placing custom size originals:
⇒ p.16 "Placing Custom Size Orig-
inals"
Note
❒ Do not stack originals beyond the
limit mark on the side fence of the
document feeder.
❒ The last page should be on the bot-
tom.
❒ When you copy 2–sided originals,
both front and back sides of each
original are scanned at once.
❒ Do not place any foreign objects on
the sensors or cover them with
your hands. This could cause a
malfunction or the size to not be
detected properly.
1.
Sensors
Placing Originals
1
13