Layering A New Recording Onto Smf Music Files - Roland Atelier AT-60SL Owner's Manual

Max Max Max Max
Min Min Min Min
Layering a New Recording
onto SMF Music Files
You can load commercially available SMF music files into the
AT-80SL/60SL, and record your own performance on top of
it. During recording, the data you've loaded will be played
back, while you record your performance.
1.
Insert a floppy disk containing commercially
available SMF music files into the floppy disk
drive.
2.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
3.
Touch < > (Utility).
The Utility screen appears.
4.
Touch <Song Select>.
The Song Select screen appears.
fig.07-31_50
5.
Touch < >< > to select the performance data
that you wish to load into internal memory.
6.
Touch <Load> (load performance data).
fig.07-32_50
The selected performance data will be loaded into
internal memory.
Harmony Intelligence
Chapter 7 Recording/Playing Back What You Play
For track assignments of SMF format performance data
loaded to the AT-80SL/60SL, refer to p. 147.
7.
Select the panel settings needed for recording the
performance.
8.
Touch the <Bwd> button and <Fwd> button to
move to the measure at which you wish to begin
recording.
9.
In the Rec/Play screen, touch <Rec> to enter
recording-standby mode.
<Play> and unrecorded track buttons in the screen will
blink. The button indicators of tracks that are already
recorded will light.
Also, the panel Composer [Rec] button indicator will
light, and the [Play/Stop] button will blink.
You can also enter recording-standby mode by pressing the
Composer [Rec] button.
10.
Touch the Track button which you wish to
recording (button flashes).
11.
In the Rec/Play screen, touch <Play> to begin
recording.
As you record, the music file that was loaded into the
AT-80SL/60SL will play back.
12.
In the Rec/Play screen, touch <Stop> to stop
recording.
The track button for which performance data has been
recorded will be lit.
You can also start and stop recording by pressing the
Composer [Play/Stop] button.
The performance data you recorded can be saved on a floppy
disk (p. 158).
NOTE
Commercially sold music files can also be loaded into the
AT-80SL/60SL, but for reasons of copyright protection,
cannot be saved in SMF format.
161