Connecting External Speakers Or An External Reverb Unit To Broaden The Reverb (Rss Reverb) (At-80Sl); Switching The Aux Out On/Off; Switching The Aux Out Mode - Roland Atelier AT-60SL Owner's Manual

Chapter 11 Connecting with External Device
Connecting External
Speakers or an external
Reverb Unit to Broaden the
Reverb
(RSS Reverb) (AT-80SL)
The AT-80SL has an Aux Out jack on the bottom of the
instrument.
By using this Aux Out jack to connect external speakers, you
can sound the reverb (reverberation) from the speakers. An
external reverb unit can also be connected and used to apply
reverb.

■ Switching the Aux Out On/OFF

1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Aux Out.
3.
Touch the Aux Out setting to switch between
"ON" and "OFF."
Each time you touch the Aux Out setting, it will alternate
between "ON" and "OFF."
4.
Touch <Exit>.
210
Max Max Max Max
Min Min Min Min

■ Switching the Aux Out Mode

1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Aux Out Mode.
3.
Touch the Aux Out Mode setting to switch
between "AMBIENCE" and "TO EFFECTOR."
Each time you touch the Aux Out Mode setting, it will
alternate between "AMBIENCE" and "TO EFFECTOR."
The reverb sound applied by the
AMBIENCE
ATELIER will be output.
TO The direct sound is output for
EFFECTOR applying reverb.
4.
Touch <Exit>.
You can change the depth of Reverb for each part (p. 133).
This setting remains stored in memory even while power is
turned off.
Harmony Intelligence