Changing The Parts Assigned To The Track Buttons During Smf Music Files Playback (Track Assign); Initializing (Formatting) Memory; Initializing Internal Memory - Roland FP-7 Owner's Manual

Various Settings
Changing the Parts Assigned to the
Track Buttons During SMF Music Files
Playback (Track Assign)
Normally, when you play back SMF music files that is
compatible with Roland Piano Digital (p. 170), the left-hand
part is assigned to the Track [1] button and the right-hand part
is assigned to the Track [2] button. However, some SMF music
files assigns the right-hand part and left-hand part to the track
buttons in a different way. If this setting is "Auto," and you are
unable to use the track buttons (p. 30) to control the right-hand
part or left-hand part as you expect, you can change the
setting to "2/1 Part" or "3/4 Part."
This setting applies to SMF format songs from USB
NOTE
memory. It does not affect the internal presets songs
or songs that are stored in internal memory.
1.
Press the [Function] button.
2.
Press the Track [1] button.
The Song File screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select "Track Assign."
4.
Use the [-] [+] buttons to change the setting.
Setting
The assignment of parts to tracks will be done
Auto
automatically according to the song data.
Part 1 is assigned to the Track [2] button, part
2/1 Part 2 to the Track [1] button, and the remaining
parts to the Track [R] button.
Part 4 is assigned to the Track [2] button, part
3/4 Part
3 to the Track [1] button, and the remaining
parts to the Track [R] button.
132
Description
Initializing (Formatting)
Memory

Initializing Internal Memory

The FP-7 contains a storage area in which you can save your
recorded performances or your registration sets. This area is
called "internal memory."
If you want to erase the entire contents of internal memory and
restore it to the factory-set condition, execute the following
procedure.
1.
Press the [Function] button.
2.
Press the Track [2] button.
The Format screen appears.
3.
While holding down the [Display] button, use
the [-] [+] buttons to select "Internal Memory."
4.
Press the [Display] button.
A confirmation message will appear.
If you want to return to the previous screen without
formatting, hold down the [Display] button, use the [-] [+]
buttons to select "Cancel," then press the [Rec] button.
5.
While holding down the [Display] button, use
the [-] [+] buttons to select "OK."