Creating Organ Sounds (Footage) (At-80Sl) - Roland Atelier AT-60SL Owner's Manual

Chapter 1 Selecting and Playing Sounds
Creating Organ Sounds
You can touch <Digital H-Bar> in the Main screen of the AT-80S to display
the Footage screen. The sliders displayed in the screen are called "harmonic
bars." The Footage Tablets that allow you to create a wide variety of organ
sounds by combining voices of different pitches.
Footage Screen
By touching the harmonic bars and sliding them, you can adjust the volume
of each footage.
The volume can be adjusted over nine steps (0–8).
When a harmonic bar is pulled out all the way (8), the volume is loudest.
When it is pushed in all the way (0), there will be no sound.
Footage Voices of Differing Pitch (feet)
As the number decreases, the pitch will become correspondingly higher.
The Footage are organized as follows.
fig.01-23
16´
1 octave
below
50
5 1 ´ 8´ 4´ 2 2 ´
3 3
1 octave
5th root 1 octave
5th
8'=
(Footage) (AT-80SL)
2´ 1 ´ 3 1 1 ´ 1´
5 3
2 octave 2 octave 3 octave
2 octave
3rd 5th
Max Max Max Max
Min Min Min Min
Harmony Intelligence
You can touch <
switch between the Upper
Footage screen and Lower
Footage screen.
The Footage screen will be
displayed for several
seconds, then it will close
automatically.
If you touch <Hold>, the
screen continues to be
displayed until you touch
<Exit>. When you touch
the Footage screen and
then change the settings,
the screen is held in that
condition.
> to