Roland Atelier AT-60SL Owner's Manual page 158

Max Max Max Max
Min Min Min Min
4.
Touch <Utility> to open the Utility screen.
The Utility screen appears.
fig.07-23
5.
Touch <Rename>.
The Rename screen appears.
fig.07-25_50
You can also access the Rename screen as follows.
1.
Touch < > (Utility) on the Rec/Play screen.
The Utility screen appears.
2.
In the Utility screen, touch <Edit>.
The Edit Menu screen appears.
3.
Touch <Rename> on the Edit Menu screen.
The Rename screen appears.
6.
Touch the character select button (
switch among uppercase/lowercase/symbols.
Touch the character select button repeatedly to cycle
through the available choices, like this: uppercase →
lowercase → symbols → uppercase...
Harmony Intelligence
Chapter 7 Recording/Playing Back What You Play
7.
Touch the screen to specify the desired character.
The following characters can be selected.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
! " # % & ' ( ) * + , - . / : = ? ^ _ 0 1 2 3 4 5 6 7 8 9
To cancel operation, touch <Cancel>.
8.
When you're done making the settings, touch
<OK>.
The new name is now inserted.
fig.07-26
NOTE
You cannot directly change or edit the name of a
performance song stored on a disk. The song must first be
loaded (p. 159) into the instrument, edited, and then saved to
disk again.
) to
Deletes a character.
Inserts a space (blank).
Move the cursor (the symbol that
indicates the location at which characters
will be input) to left or right.
157