Roland Atelier AT-60SL Owner's Manual page 152

Max Max Max Max
Min Min Min Min
5.
Touch < >< > to change the setting.
fig.07-
When you touch <Key>, the following screen appears.
fig.07-
fig.07-
The Key screen is composed of two screens. Touch
< > to switch between the two screens.
6.
Touch <Exit>.
Harmony Intelligence
Chapter 7 Recording/Playing Back What You Play
Some notes on a Score screen
• When you start playback of music files, the marks
appears. While this appears on the notation, the AT-
80SL/60SL is reading data. Please wait until reading of
the data is complete.
• In the Notation screen, some lyrics or notes could extend
beyond the edges of the screen, and not be displayed.
• The notations that are presented by the display are
produced based on the music files. Viewing ease is given
priority over precise expression when dealing with
complex, high-level music. Because of this, you may find
that the notation shown in the display does not match
what is provided on commercially available sheet music.
The notation display feature is particularly unsuitable
for the display of difficult, complex musical works that
demand accurate notation. In addition, the display
cannot show notes that are briefer than a sixteenth note.
• If you select a part that does not contain performance
data, notes will not be displayed in the notation. Use
<Option> to change the part that is displayed.
• If you use the buttons located below the display to
change the displayed part while the song is playing, the
song may be played back from the beginning.
151