Leading Bass Function - Roland Atelier AT-60SL Owner's Manual

Chapter 2 Using Rhythm Performance

Leading Bass Function

When Automatic Accompaniment is used, and the Pedal [To Lower] button
is ON, the Pedal Bass voice will normally play the root note (p. 249) of the
chord you play on the Lower keyboard.
If the Leading Bass function is enabled, the lowest note of the chord you play
on the Lower keyboard will then be used as the bass note (the bottom note
of the chord). This allows the bass to be a note other than the root of the
chord you play and the bass note will change when inverted chords are
played (p. 249).
1.
Touch <Rhythm> on the Main screen.
The Rhythm screen appears.
fig.02-09_55
2.
Touch <
The Utility screen appears.
fig.02-10_55
72
> (Utility) on the Rhythm screen.
Max Max Max Max
Min Min Min Min
Harmony Intelligence
You can also open the
Rhythm screen by pressing
the Rhythm buttons.
When the Leading Bass
function is on and the
Chord Intelligence function
(p. 70) is off, you can
specify chords with a
combination of the lower
keyboard and pedalboard.