Turning Off The Power; Using Headphones - Roland Atelier AT-60SL Owner's Manual

Max Max Max Max
Min Min Min Min
2.
Press the [Power On] button to turn on the power.
fig. 00-27
Lower position
Power On
ON
The Power indicator lights in red.
Power Indicator
NOTE
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before the
unit will operate normally.
3.
The [Master Volume] slider located on the left of
the Lower Keyboard panel is an overall control
for adjusting the volume of the entire instrument.
Now adjust the [Master Volume] slider to a suitable
level. The volume will be increased when the Expression
Pedal is pressed down, and decreased when the pedal is
returned.
fig.00-28
decrease
Max
the volume
increase
Min
Master
the volume
Volume

■ Turning Off the Power

1.
Before switching the power off, set the [Master
Volume] slider to the Min (minimum) position.
2.
Press the [Power On] button to turn off the power.
fig. 00-27
Upper position
Power On
OFF
Harmony Intelligence
Before You Start Playing

Using Headphones

The AT-80SL/60SL features a Phones jack. This allows you to
play without having to worry about bothering others around
you, even at night.
fig.00-29
1.
Connect your headphones to the [Phones] jack
underneath the left side of the keyboard.
The sound from the built-in speakers stops.
Now, sound is heard only through the headphones.
fig.00-30
Phones
2.
Adjust the headphones volume with the [Master
Volume] slider and Expression pedal.
Accepts connection of Stereo headphones.
Some Notes on Using Headphones
fifig.00-31
• To prevent damage to the cord, handle the headphones
only by the headset or the plug.
• Headphones may be damaged if the volume is too high
when they are plugged in. Lower the volume on the AT-
80SL/60SL before plugging in headphones.
• To prevent possible auditory damage, loss of hearing, or
damage to the headphones, the headphones should not
be used at an excessively high volume. Use the
headphones at a moderate volume level.
21