Callback Uris - Siemens OpenStage 20 Administration Manual

administration.fm
Administration
Features - Configuration
3.6.4

Callback URIs

The Callback option allows the user to request a callback on certain conditions. The callback
request is sent to the SIP server. The Code for callback busy requests a callback if the line is
busy, i. e. if there is a conversation on the remote phone. Code for callback no reply applies
when the call is not answered, i. e. if nobody lifts the handset or accepts the call in another way.
The Code for callback cancel all all deletes all the callback requests stored previously on the
telephone system/SIP server.
Data required
• Code for callback busy / Callback: Busy: Access code that is sent to the server if the
line is busy.
• Code for callback no reply / Callback: No reply: Access code that is sent to the server
if the callee does not reply.
• Code for callback cancel all / Callback: Cancel all: Access code for canceling all call-
back requests on the server.
Administration via WBM
System > Features > Services
Administration via Local Phone
|
--- Administration
|
--- System
|
--- Features
|
--- Addressing
|--- Callback: Busy
|--- Callback: No reply
|
--- Callback: Cancel all
3-52
A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual