Ringer File; Ftp/Https Access Data - Siemens OpenStage 20 Administration Manual

3.10.9

Ringer File

Custom Ringtones can be uploaded to the phone. The following file formats are supported:
• WAV format. The recommended specifications are:
• Audio format: PCM
• Bitrate: 16 kB/sec
• Sampling rate: 8 kHz
• Quantization level: 16 bit
• MIDI format.
• MP3 format (OpenStage 60/80 only). The OpenStage 60/80 phones are able to play MP3
files from 32 kbit/s up to 320 kbit/s. As the memory for user data is limited to 8 MB, a con-
stant bitrate of 48 kbit/sec to 112 kbit/s and a length of max. 1 minute is recommended.
Although the phone software can play stereo files, mono files are recommended, as the
phone has only 1 loudspeaker.
See the following table for estimated file size (mono files):
Length
0:15 min
0:30 min
0:45 min
1:00 min
Tabelle 3-2
3.10.9.1

FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see Section 3.10.2, "Common FTP/HTTPS Set-
tings") are to be used, Use default must be set to "Yes", and only the Filename must be spec-
ified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No".
Default: "No".
• Filename: Specifies the file name of the phone software.
A31003-O1010-M100-9-76A9, 05/05/2008
HiPath 8000 - OpenStage Family, Administration Manual
Transferring Phone Software, Application and Media Files
64 kbit/s 80 kbit/s
0,12 MB 0,15 MB
0,23 MB 0,29 MB
0,35 MB 0,44 MB
0,47 MB 0,59 MB
96 kbit/s 112 kbit/s
0,18 MB 0,21 MB
0,35 MB 0,41 MB
0,53 MB 0,62 MB
0,70 MB 0,82 MB
administration.fm
Administration
3-99