Automatic Vlan Discovery (Dhcp) - Siemens OpenStage 20 Administration Manual

administration.fm
Administration
LAN Settings
3.2.2.1

Automatic VLAN discovery (DHCP)

To automatically discover a VLAN ID using DHCP, the phone must be configured as DHCP en-
abled, and VLAN discovery mode must be set to "DHCP". The DHCP server must be config-
ured to supply the Vendor Unique Option in the correct Siemens VLAN over DHCP format. If a
phone configured for VLAN discovery by DHCP fails to discover its VLAN, it will proceed to con-
figure itself from the DHCP within the non-tagged LAN. In these circumstances network routing
will probably not be correct.
Administration via WBM
Network > IP configuration
Administration via Local Phone
|
--- Administration
|
--- Network
|
--- IP Configuration
|
--- VLAN discovery
A31003-O1010-M100-9-76A9, 05/05/2008
3-8
HiPath 8000 - OpenStage Family, Administration Manual