Entering Long-Distance Codes; Restoring The Factory Setting; Querying The Status - Siemens Gigaset 3070/75 ISDN User Manual

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
System settings

Entering long-distance codes

Step
by
In order to display national and international calls correctly and return them
Step
without problems, you must ensure that long-distance codes are set properly.
By default:
national = 0
international = 00
1. Press
Select using [ ] and [OK]:
2.
Lg.-dist.digits
Select using [ ] and [
3.
Select using [ ] and [OK]:
4.
Enter the new or changed code and confirm with [
5.
6. Select using [ ] and [OK]:

Restoring the factory setting

You can choose the settings that are to be restored:
Operational – All MSNs and prefix codes (exchange codes) are deleted. Au-
thorizations are reset to the default settings.
Reset all – All functions are reset to the default settings (see "Restoring the
factory setting" on page 53). The system PIN is reset to "0000". All entries
(missed calls list, costs) are deleted. Before resetting, you must deactivate
all active call forwarding settings.
1. Press
Select using [ ] and [OK]:
2.
Spec. function
3. Confirm with [OK].
4.
Operational
5.
"Settings reset" and wait for the confirmation tone.
or Select using [ ]
5.
6.

Querying the status

You can query the status of the following settings:
Callback
Anonymous calling and answering
Call forwarding
Press
1.
Select using [ ] and [OK]:
2.
3. Press [OK] to open the status list
( before an item = system function active).
26
for selection menus.
Service Set up
.
]: (national or international) .
Change number
Save entry
for selection menus.
Service Set up
Default Reset .
is displayed. Confirm with [OK]. Acknowledge the message
Reset all and confirm with [OK].
YES
for selection menus.
Service Set up
giga3070KAP .fm
Settings ISDN settings
.
].
.
Settings System settings
[OK].
Status
09.01.01