Operation With The Entrance Telephone; Configuring The Entrance Telephone - Siemens Gigaset 3070/75 ISDN User Manual

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619

Operation with the entrance telephone

Operation with
Step
by
Step
the entrance telephone

Configuring the entrance telephone

Press
1.
Select using [ ] and [OK]:
2.
Set up device
Select using [ ] and [
3.
Select using [ ] and [OK]:
4.
Assigning internal users to the entrance telephone call group
1. Press
Select using [ ] and [OK]:
2.
Set up device
3. Select using [ ] and [
Select using [ ] and [OK]: Door call grp..
4.
Forwarding the entrance telephone externally
All entrance telephone calls can be forwarded to an external call number.
Entering/modifying a destination call number for external call forwarding
Press
1.
Select using [ ] and [OK]:
2.
Set up device
Select using [ ] and [
3.
4. Select using [ ] and [OK]: Forw.entr.tel..
Select using [
5.
If a destination call number has not yet been stored, the entry <blank> is dis-
played.
Select using [ ] and [OK]: Change number.
6.
Enter the new or modified destination call number and confirm with [
7.
Select using [ ] and [OK]: Save entry.
8.
Deleting a destination call number for external call forwarding
Press
1.
Select using [ ] and [OK]:
2.
Set up device
Select using [ ] and [
3.
Select using [ ] and [OK]: Forw.entr.tel..
4.
Select using [
5.
Select using [ ] and [OK]: Delete number.
6.
*. This configuration is only applicable for entrance telephones in accordance with FTZ
(door opener via ring current). Telephones with DTMF control must be programmed
like normal telephones.
66
for selection menus.
Service Set up
.
]: (required internal subscriber 21 or 22) .
Device select.
for selection menus.
Service Set up
.
]: (required internal subscriber) .
for selection menus.
Service Set up
.
]: (required internal subscriber) .
]: (destination call number) .
for selection menus.
Service Set up
.
]: (required internal subscriber) .
]: (delete number) .
giga3070KAP .fm 09.01.01
Settings Set up user
*
Door .
Settings Set up user
Settings Set up user
Settings Set up user
].