Table of Contents
Advertisement
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
Registering the Gigaset 3000 Classic handset
Step
by
Switch on the handset with a long press on the
1.
Step
Press
2.
3.
Enter the base station number, generally 1, and confirm with
The
tion to the base station has been established.
Enter the base station PIN (factory setting: 0000) and confirm with [OK].
4.
5.
Press the green illuminated key on the base station, the key flashes steadily.
Select an unassigned internal call number (11 - 18). The handset is then suc-
6.
cessfully registered (the symbol indicating readiness for registration stops
flashing).
Registering other devices
If you would also like to register other handsets (e.g. Gigaset 2000S, GAP hand-
sets) or cordless devices (e.g. Gigaset 1000 TAE, STA), please select the inter-
nal numbers 11 - 15. These devices are not called at the numbers 16 - 18!
It is possible to register a maximum of 8 cordless devices (Gigaset handsets in
the 3000 and 2000 series, Gigaset 1000 TAE, Gigaset M101 Data, Gigaset
M105 Data and GAP handsets from other manufacturers). A Gigaset 1000C be-
haves at a Gigaset 3070/3075isdn in the same way as a GAP handset.
Please refer to the relevant operating instructions for information on the regis-
tration procedures.
A Gigaset repeater for increasing the range of the handsets does not require a
free registration location. You can register up to 6 Gigaset repeaters at a single
base station.
Deregistering devices
When deregistering devices, unlike when registering devices, no further steps
are required on the base station. All devices that remain registered retain their
previous internal call numbers.
A handset/data module can be deregistered from any registered Gigaset 3000
Comfort, as can the Gigaset M101 Data and Gigaset 105 Data.
Press
1.
Select using [ ] and [OK]:
2.
device
.
This opens a list of internal numbers.
3.
Select using [ ] (desired internal number) .
Press [OK] to deregister the device with the chosen internal number.
4.
in sequence.
symbol initially flashes, but then remains steadily lit when the connec-
for selection menus.
Service Set up
giga3070KAP .fm
Getting started
key.
.
Settings
Set up user
09.01.01
De-reg.
7
Hide quick links:
Advertisement
Table of Contents
