Table of Contents
Advertisement
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
Getting started
Step
by
Step
Connecting the base station
V
socket: insert in the ISDN connection cable until the plug locks into place.
1.
2.
Insert in the ISDN connection cable in the ISDN socket until the plug locks into
place.
In the case of NTBA with self-assembly, insert the cable between the NTBA
3.
and the TAE (old telephone socket) until both plugs lock into place.
socket: insert the mains connection cable securely into the plug and insert
4.
the plug into the socket.
If required, connect the PC via USB cable to the USB bus (only supported with
5.
Windows 98).
Profiset talk&surf:
It is not possible to install Profiset talk&surf and Gigaset talk&surf simultane-
ously on the same PC. Otherwise, problems will occur as both programs at-
tempt to access the same interface. You must therefore choose either Gigaset
talk&surf or Profiset Talk&surf. When upgrading, the old program version must
first be deinstalled.
4.
Only the plug-in power supply unit provided should be used (see un-
derside of base station).
Power failure:
In the event of a power failure, your base station, the handsets which
are registered at it and any corded terminals are not operational. All set-
tings and saved information (messages, directory entries) are retained
for an unlimited period.
giga3070KAP .fm
Getting started
21
22
1.
5.
2.
09.01.01
3.
5
Hide quick links:
Advertisement
Table of Contents
