Siemens Gigaset 3070/75 ISDN User Manual page 24

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
The Installation Assistant (Comfort handsets only)
Setting the device type
Step
by
[ Telephone ] is preset for the analog connections Internal 21 and Internal 22.
Step
You can make and receive calls once a telephone is connected. If you connect
an additional corded device (e.g. fax), the device type must be modified again
accordingly. The entry "No function" blocks any additional input for this device
in the case of MSN and answering machine configurations.
Confirm the prompt for setting the device type for subscribers with [YES].
1.
Confirm the prompt for assignment with [YES].
2.
Select using [ ] and [OK]: (required device) .
3.
The assignments for additional internal subscribers are offered.
Selecting the incoming MSN
This is the call number used to contact your handset. You can select several
MSNs and corded terminals can also be set via the handset. For possible sub-
scriber numbers see page 27.
1. Confirm the prompt for incoming MSN references with [YES].
Confirm the prompt for assignment with [YES].
2.
Select using [ ] and [OK]: (one or more MSN) .
3.
The selection is confirmed with .
Quit with [
4.
Selecting the outgoing MSN
You are conducting an outgoing call via this call number. This call number is
transmitted to the called party. The provider calculates the call charges incurred
using this MSN. You can only select one outgoing MSN.
Confirm the prompt for outgoing MSN references with [YES].
1.
2. Confirm the prompt for assignment with [YES].
Select using [ ] and [OK]: (one MSN) .
3.
Connecting to a PABX
If you require a PABX connection:
Answer the prompt for the PABX with [YES].
1.
Confirm the prompt for the prefix (exchange code) with [YES].
2.
Enter the exchange code and confirm with [
3.
Select using [ ] and [OK]:
4.
The installation is terminated with the aid of the Installation Assistant.
20
].
Save entry .
giga3070KAP .fm 09.01.01
].